|
|
Post by pyroguy on Jul 15, 2004 18:52:12 GMT -5
My launcher is propane injected with several different sized barrels that can be used. The i have a barrel that fits golf balls but i cant think of a way to keep the ball in place and sealed when i hit the gas.... what do you guys think i could do to fix this problem?
|
|
|
|
Post by ihaveauniquename on Jul 17, 2004 15:08:12 GMT -5
burst disk
|
|
|
|
Post by pyroguy on Jul 18, 2004 0:28:12 GMT -5
i thought of that, but it seems like there has to be a rubber seal or somthing i can put in the barrel. Whatever, i mess around with it and it try some stuff.
|
|
|
|
Post by boogieman on Jul 21, 2004 11:48:50 GMT -5
use a few layers of duct tape inside the breech of the barrel. (back). Simple and effective  |
|
|
|
Post by SUPERSPUD on Sept 8, 2004 10:07:02 GMT -5
have a problem with it rolling out of the gun or into the chamber?
|
|
|
|
Post by DReynolds on Feb 28, 2005 19:00:12 GMT -5
Put a bead or two of pvc cement down at the base. Pretty simple, but it works.
|
|
